SKIM500 Offline Insulaton Monitor

Smart monitor the insulation resistance of 3 motors when it is stopped

Previous：Nothing

Next：SKIM800PV Insulation Monitor for Photovoltaic

Description

The SKIM500 insulation monitor uses the DC injection method to measure the insulation of cables or motor windings, etc. The test voltage is DC500VDC. If the corresponding circuit inside the equipment is enabled, the device is interlocked with the circuit contactor or the auxiliary contact of the circuit breaker for control, so that when the motor circuit is energized, the insulation monitor exits the monitoring and is separated from the power grid. When the power of the line is cut off, the insulation monitor automatically starts to monitor the insulation of the line. This device can measure three different motors.

SKIM500 Features:

Applicable to power grid voltage below 1140V.
Three independent measures of insulation resistance to ground.
Three independent relay alarm outputs.
Test and reset functions.
LCD screen with backlight can be used to check and set various parameters.
S-485 interface communication adopts Modbus protocol.
The measurement process is fully automatic and can also be started manually.

SKIM500 Technical Data:

Item	Parameters	Remark
Power supply	AC 85-265V 50Hz
Rated Power	Less than 5W
Mechanical Dimensions	13589110
Equipment weight	≤0.6Kg
Insulation resistance measurement range	0~499.99MΩ	Minimum resolution 10kΩ
Insulation alarm setting value	0~100.00MΩ
Insulation warning setting value	0~100.00MΩ
Measuring signal voltage	DC500V	The voltage can be customized according to requirements
Dry contact output characteristics	Normally closed contact，250VAC/6A；30V/6A
Ambient temperature	-20℃~50℃
Ambient humidity	Relative humidity <95%

Focusing on production and sales of insulation monitoring, insulation fault locator, residual current monitor etc.

Email：info@sikcon.com

Address：Guangzhou, Guangdong Province, China