中
MIR2500 High Voltage Motor Insulation Monitor

MIR2500 High Voltage Motor Insulation Monitor

Smart monitor the insulation resistance of motor below 10kV when it is stopped
Description
The MIR2500 series high-voltage motor insulation monitor is an intelligent insulation monitoring device designed for motors with voltage levels of 10kV and below. It provides early warning of motor insulation degradation through automatic insulation resistance measurement and dynamic alarm mechanism in power outages. The device integrates power electronics technology, embedded systems and intelligent algorithms to provide accurate data support for predictive maintenance of industrial motors.

Compositions of MIR2500 Insulation Monitor:
This device uses DC high-voltage injection method (test voltage DC2500V) to measure insulation parameters. The core architecture consists of three parts:
MIR2500 display module: a low-power human-machine interaction unit based on the RJ45 interface, which does not require independent power supply. It realizes visualization of measurement results and parameter configuration through real-time data communication, and adopts high and low voltage isolation design to ensure operational safety;
MIR2500 insulation monitor: an integrated intelligent logic control unit, which realizes the automatic control logic of "power-on exit monitoring, power-off start measurement" through interlocking with the auxiliary contacts of the power supply circuit contactor/circuit breaker, avoiding the risk of live measurement;
AGH10-3 coupler: adopts an innovative high and low voltage isolation structure, which electrically isolates the device body from the high-voltage bus while realizing measurement signal coupling.

MIR2500 Insulation Monitor Features:
Precise measurement: supports 1MΩ~100GΩ wide range insulation resistance measurement, with ±3% (1MΩ~5GΩ) and ±10% (5GΩ~100GΩ) measurement accuracy;
Degradation analysis: Through the calculation of polarization index (PI, 10min and 1min insulation resistance ratio) and dielectric absorption ratio (DAR, 1min and 30s insulation resistance ratio), the degree of insulation aging can be quantitatively uated;
Intelligent discharge: After the measurement is completed, the parasitic charge discharge mechanism is automatically triggered to ensure the safety of operators.

MIR2500 Insulation Monitor Specifications
 
Item Parameters Remark
Power supply AC 85V-265V 45-65Hz  
Rated Power ≤15W  
Grid rated voltage 0-10KV  
Measuring voltage 2500VDC DC voltage
Insulation resistance measurement range 1MΩ~100GΩ Pure resistance condition
Dielectric Absorption Ratio Ratio of insulation resistance 1min to 30s  
Polarization Index Ratio of insulation resistance 10min to 1min  
Insulation alarm value 10KΩ~100GΩ adjustable According to user’s requirements
Insulation alarm delay 0~9999s can be set
Leakage current alarm setting value 10~10000 mA can be set
Leakage current warning setting value 10~10000 mA can be set
Password 0000~9999 can be set
Switch input 3-way interlocking contact  
Switch output 4-way relay  
Relay output load capacity Normally closed contact, 250VAC/5A  
communication Modbus RTU/TCP  
Display lattice 128*64  
Work Environment -20℃~50℃， No condensation  
Storage environment -40℃~75℃， No condensation  
Operating altitude 2000m  
Focusing on production and sales of insulation monitoring, insulation fault locator, residual current monitor etc.
Focusing on production and sales of insulation monitoring, insulation fault locator, residual current monitor etc.

Email：info@sikcon.com

Address：Guangzhou, Guangdong Province, China